Long Range WiFi Repeater Extender Outdoor 3000Mbps WiFi 6 Router Dual Band

  
Supports for dual band (2.4G 573Mbps+ 5G 2402Mbps) with the aggregated speeds up to 3000Mbps. Supports one WAN/LAN Ethernet Gigabit port. Complies with IEEE 802.1 ax/ac/n/g/a/b standards. Supports AP/Range Extender/Mesh Router/Mesh Extender mode. Encryption type: OPEN, WPA2-PSK, WPA3/WPA2 MIX. 2x8dBi 5GHz and 2x8dBi 2.4GHz detachable omni-directional external antennas provide excellent wireless performance. Glass tube antenna for high precision, corrosion resistance. Long life, strong wind resistance. Seamless and stable WiFi Mesh makes you enioy seamless roaming throughout the house with a single network name and password. Robust weatherproof case and IP67 waterproof grade withstand harsh outdoor conditions. Supports 802.3 AT/AF Active PoE and Passive PoE to supply power. Specification - Model: WL-WN573HX3 - Product Size(without antennas): 24x24x7cm/9.4x9.4x2.8in - PoE Converter Size: 4.4x3.7x2.2cm/1.7x1.5x0.9in - Length: Antennas - 40cm/15.7in; Ethernet Cable - 100cm/39.4in; Power Adapter Cable - 130cm/51.2in - Product Weight(without antennas): 1109g/39.1oz - Standard: IEEE 802.11 ax/ac/a/n/g/b - Frequency Band/Speed: 2.4GHz(573Mbps)+5GHz(2402Mbps) - Wireless Security: WPA2-PSK, WPA2/WPA3-MIX - Antennas: 4 x 8dBi Omnidirectional Antennas - PAIR/RESET LED: Blue - PoE Converter Status LED: Green. In the Box 1 x AX3000WiFi 6 Outdoor Access Point 4 x Omni Antennas 4 x Cable Ties 1 x Ethernet Cable Connectors 1 x Quick Installation 1 x Wrench 2 x Silicone Pads Several Screws Passive PoE(Optional): 1 x 54V Power Adapter 1 x PoE Converter 1 x Ethernet Cable. The PoE converter is not waterproof, please install it indoors. Please make sure your Ethernet cable is CAT5E or above certified and shorter than 100m/328ft. Please install the product 2-3 meters above the ground for better performance. Under the mesh mode, WN573HX3 supports interconnection with WN586X3, WN572HP3(Latest firmware required) and WN573HX3. How to install antennas and Ethernet cable? Pass the RJ45 cable through the waterproof connector cover. Screw the waterproof seal into the waterproof connector bracket. Pass the RJ45 cable through the waterproof connector bracket, and screw the waterproof connector bracket into the cover.

Put the waterproof sealing ring on the waterproof connector bracket. Connect the RJ45 cable to WAN/LAN port. Screw the connecting cable into the 2.4G and 5G antenna connector and screw up the connector.

How to install the product on a column? Stick two silicone pads on the bracket and post respectively. Thread the cable ties through the fixing point of the bracket. Fix the product to the post with cable ties.