Cisco Outdoor Omnidirectional Antenna For 2g/3g/4g Cellular 3.5 Dbi Cellular

  
The Cisco Outdoor Omnidirectional Antenna for 2G/3G/4G Cellular antenna is designed to cover domestic LTE700/Cellular/PCS/AWS/MDS, WiMAX 2300/2500, and GSM900/GSM1800/UMTS/LTE2600 bands and is supported on the Cisco CGR 2010, 1240, and the 1120 routers. The Omnidirectional Outdoor Antenna is compatible with Cisco 2G, 3G, and 4G cellular devices that use a Type N connector and requires a mast-mounted outdoor antenna. The Outdoor Omnidirectional Stick antenna features the following. Applicable for both 2G and 3G solutions. Domestic LTE 700 band and Global LTE 2600 band. Domestic cellular and global GSM.

Avoid using or servicing any equipment that has outdoor connections during an electrical storm. There may be a risk of electric shock from lightning. Do not work on the system, or connect or disconnect cables, during periods of lightning activity. Do not locate the outdoor antenna near overhead power lines or other electric light or power circuits, or where it can come into contact with such circuits.

When installing the antenna, take extreme care not to come into contact with such circuits, as they may cause serious injury or death. For proper installation and grounding of the antenna, please refer to national and local codes for example, U.

NFPA 70, National Electrical Code, Article 810, Canada:Canadian Electrical Code, Section 54. This equipment must be grounded. Never defeat the ground conductor or operate the equipment in the absence of a suitably installed ground conductor. Contact the appropriate electrical inspection authority or an electrician if you are uncertain that suitable grounding is available.

Only trained and qualified personnel should be allowed to install, replace, or service this equipment. To report a gas leak, do not use a telephone in the vicinity of the leak. This warning symbol means danger.

You are in a situation that could cause bodily injury. Before you work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar with standard practices for preventing accidents. Use the statement number provided at the end of each warning to locate its translation in the translated safety warnings that accompanied this device.

This product is not intended to be directly connected to the Cable Distribution System. Additional regulatory compliance and legal requirements may apply for direct connection to the Cable Distribution System. This product may connect to the Cable Distribution System ONLY through a device that is approved for direct connection.

Installation of this antenna near power lines is dangerous. For your safety, follow the installation directions. Each year hundreds of people are killed or injured when attempting to install an antenna. In many of these cases, the victim was aware of the danger of electrocution, but did not take adequate steps to avoid the hazard. For your safety, and to help you achieve a good installation, please read and follow these safety precautions.

They may save your life! For your safety, read and follow these safety precautions. If you are installing an antenna for the first time, for your own safety as well as others, seek professional assistance. Your Cisco sales representative can explain which mounting method to use for the size and type antenna you are about to install. Before you install an antenna, contact your Cisco account representative to explain which mounting method to use for the size and type of antenna that you are about to install.

Find someone to help youinstalling an antenna is often a two-person job. Select your installation site with safety, as well as performance, in mind.

For your safety, assume that any overhead line can kill you. Contact your electric power company. Tell them your plans and ask them to come look at your proposed installation. Plan your installation carefully and completely before you begin. Each person involved in an installation should be assigned to a specific task, and should know what to do and when to do it.

One person should be in charge of the operation to issue instructions and watch for signs of trouble. When installing your antenna, follow these guidelines. Do not use a metal ladder. Do not work on a wet or windy day.

Do dress properlywear shoes with rubber soles and heels, rubber gloves, and a long-sleeved shirt or jacket. If the assembly starts to drop, move away from it and let it fall. Because the antenna, mast, cable, and metal guy wires are all excellent conductors of electrical current, even the slightest touch of any of these parts to a power line completes an electrical path through the antenna and the installer.

If any part of the antenna system should come in contact with a power line, do not touch it or try to remove it yourself. Call your local power company to have it removed safely. If an accident should occur with the power lines, call for qualified emergency help immediately. The item "Cisco Outdoor Omnidirectional Antenna For 2g/3g/4g Cellular 3.5 Dbi Cellular" is in sale since Monday, December 30, 2019. This item is in the category "Computers/Tablets & Networking\Enterprise Networking, Servers\Directional Antennas".

The seller is "knutecllc1" and is located in Bradenton, Florida. This item can be shipped to United States.

• Model: ANT-4G-OMNI-OUT-N
• Country/Region of Manufacture: Malaysia
• Directivity: Omni-Directional
• MPN: ANT-4G-OMNI-OUT-N
• Brand: Cisco Systems