Cisco Air-Ant2568vg-N= Network Antenna 8 Dbi Omni-Directional Antenna N-Type

  
Cisco Aironet Dual-Band Omnidirectional Antenna (AIR-ANT2568VG-N) is designed for outdoor use with Cisco Aironet Outdoor Access Points (hereafter referred to as access points) with radios operating in the 2.4-GHz and 5-GHz frequency bands. Installation Notes The antenna is designed to connect to a dedicated antenna port on the access point.

No special tools are required to install the antenna. The antenna is resistant to the full range of outdoor environments. After the antenna is attached to the access point, seal the connections to prevent moisture and other weathering elements from affecting performance. Cisco recommends using a coax seal (such as CoaxSeal) for outdoor connections. Silicone sealant or electrical tape are not recommended for sealing outdoor connections.

Cisco AIR-ANT2568VG-N= network antenna 8 dBi Omni-directional antenna N-type. Choosing a Mounting Location The antenna is designed to create an omnidirectional broadcast pattern. To achieve this pattern, the access point should be mounted clear of any obstructions to the sides of the radiating element. If the mounting location is on the side of a building or tower, the antenna pattern is degraded on the building or tower side. Generally, the higher an antenna is above the ground, the better it performs. A practice is to install your antenna about 5 to 10 ft (1.5 to 3 m) above the roof line and away from all power lines and obstructions. Tools and Equipment Required No tools are required to mount the antenna to the access point.

However, you may need a ¾-in. (19-mm) open end or combination wrench (or adjustable wrench) to remove the antenna port covers. For information about tools required to mount the access point, see the appropriate access point documentation. Mounting the Antenna To connect the antenna to the access point, follow these steps: Step 1 If necessary, remove the antenna port cover.

Step 2 Align the antennas N connector with the appropriate antenna port. Step 3 Gently push the antenna into the port. Step 4 Tighten the antenna hand tight.

Photos are for illustration only, it may differ from the actual item. 2400 - 2483, 5150 - 5925 GHz. Antenna gain (2.4 GHz).

We know youll be keen to receive your order as quickly as possible. Please do not provide PO Box or Parcel Locker address, as most of our couriers do not deliver PO box and Parcel Locker. We pack every order carefully to ensure it reaches you in good condition. Your order will be sent through one of our preferred couriers. We recommend you use eBays Shopping Cart for multiple item orders so you can pay in one go.

We do not deliver PO Box addresses. And we will do our best to make sure youre happy. Some manufacturers prefer that end users deal directly with them, and others prefer to work through us. And well make sure the correct process is followed so the issue can be addressed as quickly as possible for you.

Each product we sell comes with automatic guarantees that cannot be excluded under Australian law. BESTART AUSTRALIA is the leading independent Australian retailer for IT and Office supplies, our customer range from big organisations, SMEs and consumers with more than 50,000 products available on the market.

Get the latest news, updates and special offers about our store. The item "Cisco Air-Ant2568vg-N= Network Antenna 8 Dbi Omni-Directional Antenna N-Type" is in sale since Sunday, January 12, 2020. This item is in the category "Computers/Tablets & Networking\Home Networking & Connectivity\Boosters, Extenders & Antennas".

The seller is "be-start" and is located in Sydney. This item can be shipped worldwide.

• Brand: Cisco
• MPN: AIRANT2568VGN=
• Type: network antennas
• Model: AIR-ANT2568VG-N=
• Colour: not applicable
• Compatible Brand: Cisco
• Compatible Model: not applicable
• Material: not applicable
• Style: not applicable
• Product: network antennas
• Size: not applicable