Adjustable Amplification Most people think more is better. This is not always the case when talking about TV antenna amplifiers.
In many cases too much signal will do more harm than good to your overall signal and reception quality. The Channel Master Amplify eliminates the need for a consumer to be conscious about signal strength while still providing an industry leading 30dB of gain.With the inclusion of an easy push button gain switch, you can easily start with the high setting of 30dB gain and if you determine that this much signal has a negative impact on your reception, you can simply push the button and switch to the low setting of 17dB which in most cases will be a safe amount of gain and make a noticeable difference in signal quality. When installed indoors directly behind a television set, it is recommend NOT to use the high (30dB) setting. Flexible USB Powering Options The Channel Master Amplify includes two flexible powering options. Indoors When installed indoors, the Amplify can be powered directly via the included USB power cube or by connecting the included USB cable to an open USB port on a television or set top device eliminating the need for connections directly to an electrical outlet. Not all USB ports will provide a sufficient amount of voltage to power the amplifier; you will need to ensure that your device USB port supports a 5V 1.0A output. Outdoors When the Amplify is installed outdoors, it includes a USB power inserter which allows you to install the power adapter and injector inside near your television inserting power up to the amplifier over your existing coaxial cable. LTE and Out of Band Filtering The proliferation of LTE signal towers and connected LTE devices are a common cause of intermittent television signal disruption because mobile carriers operate on frequencies that can be very close to your broadcast TV frequencies. These disruptions can result in weak signals, pixilation or even channel loss, and can be especially disruptive when using an amplifier with your TV antenna. You wont have to worry about this with the Channel Master Amplify. Built-in filters are designed to clear your OTA TV signal path from common interference including those created by mobile LTE signals.
If you are a consumer or less-experienced installer looking for a professional-grade TV antenna amplifier that provides a convenient installation yet robust quality and performance, look no further than the Channel Master Amplify. OMNI+ Omni-Directional Outdoor TV Antenna.Roof, Attic, Mast, Eave, Chimney. 54 to 216 and 470 to 700 MHz. Wall Bracket with U-bolt up to 1-3/4 in. (at 100 mph, no ice) - 2.75 lb.
Features (AMPLIFY Adjustable Gain Preamplifier). Decreases Pixilation on TV Screen. May Increase Number of Received TV Channels From Antenna. Ultra Low Noise (Typically Less Than 2dB).Blocks LTE Interference From 3G/4G Smartphones and Transmitters. Mast Mounting Straps Allow Close Proximity Installation to Outdoor Antenna. Professional Grade Quality and Performance.
EMI and FM Out of Band Filtering (Does Not Pass FM Signals). Includes Toggle Switch for Quick and Easy Gain Adjustment (17 dB/30 dB). Specifications (AMPLIFY Adjustable Gain Preamplifier). Impedance (Input and Output): 75 Ohm.Frequency Range: 54MHz80MHz and 125MHz700MHz. Gain: 30dB (High) / 17dB (Low). Noise Figure: Typically Less Than 2dB. Max Input Level: 18 (High) 10 (Low) dBmV.
Max Output Level: 34 dBmV. FM Trap: 88-95 MHz; >10dB, 95-108 MHz; >13dB.Operating Temperature: -40 C to +60 C. Size (Product): 5.125 x 2.0 x 1.0 in.
The item "Channel Master Omnidirectional Outdoor TV Antenna Adjustable Preamplifier Bundle" is in sale since Thursday, May 14, 2020. This item is in the category "Consumer Electronics\TV, Video & Home Audio\TV, Video & Audio Accessories\TV & Video Accessories\Antennas". The seller is "channelmasteroutlet" and is located in Chandler, Arizona.This item can be shipped to United States.