Supports for dual band (2.4G 573Mbps+ 5G 2402Mbps) with the aggregated speeds up to 3000Mbps. Supports one WAN/LAN Ethernet Gigabit port. Complies with IEEE 802.1 ax/ac/n/g/a/b standards. 3x7dBi 5GHz, 3x7dBi 2.4GHz detachable omni-directional external antennas provide excellent wireless performance. Supports Router/AP/Range Extender/Mesh Router/Mesh Extender mode.
Encryption type: OPEN, WPA2-PSK, WPA3/WPA2 MIX. Seamless and stable WiFi Mesh makes you enjoy seamless roaming throughout the house with a single network name and password. Robust weatherproof case and IP67 waterproof grade withstand harsh outdoor conditions. Supports 802.3 AT/AF Active PoE and Passive PoE to supply power. Supports Fit AP Mode with WAVLINK AC controller.
Specification - Model: WL-WN588HX3 - Product Size: 17x17.3x5.1cm/6.7x6.8x2in - PoE Converter Size: 4.4x3.7x2.2cm/1.7x1.5x0.9in - Length: Ethernet Cable - 100cm/39.4in; Power Adapter Cable - 130cm/51.2in - Product Weight: 552g/19.5oz - Standard: IEEE 802.11 ax/ac/a/n/g/b - Frequency Band/Speed: 2.4GHz(573Mbps)+5GHz(2402Mbps) - Wireless Security: WPA2-PSK, WPA2/WPA3-MIX - Antennas: 6 x 7dBi Directional Antennas - PAIR/RESET LED: Blue - PoE Converter Status LED: Green. In the Box - 1 × AX3000 WiFi 6 Outdoor Access Point - 4 × Plastic Cable Ties - 1 × Main Body Holder - 6 x 7dBi Antennas - 1 × Wrench - 1 × 54V Power Adapter - 1 × PoE Converter - 1 × Ethernet Cable - 1 × PWM M3×5×6MM Screw - 6 × KA M3×20×5.2MM Screws - 6 ×?6.5x25MM Screw Plugs - 1 × Quick Start Guide. The PoE converter is not waterproof, please install it indoors. Please make sure your Ethernet cable is CAT5E or above certified and shorter than 100m/328ft.
Under the mesh mode, WN588HX3 supports interconnection with WN586X3, WN583AX3 and WN573HX3. The real performance of the product may vary in accordance with different environmental conditions. How to Install the Ethernet cable?
Pass the RJ45 cable through the waterproof connector cover. Screw the waterproof seal into the waterproof connector bracket. Pass the RJ45 cable through the waterproof connector bracket, and screw the waterproof connector bracket into the cover.
Put the waterproof sealing ring on the waterproof connector bracket. Connect the RJ45 cable to WAN/LAN port.Note : The PoE converter is not waterproof, please install it indoors.